Mitsubishi Electric MELSEC iQ-R Series User Manual page 139

CH1 Conversion enable/disable setting
Set whether to enable or disable the temperature conversion.
For details on the conversion enable/disable setting function, refer to the following.
Page 18 Conversion Enable/Disable Setting Function
Setting value
0
1
Setting a value other than the above results in Conversion disable (1).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Conversion enable/disable setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Conversion disable (1) for all the channels.
Setting content
Conversion enable
Conversion disable
CH1 CH2 CH3
500 700 900
CH4 CH5 CH6
1100 1300 1500
Appendix 3 Buffer Memory Areas
CH7 CH8
1700 1900
A
APPX
137