Table of Contents
Advertisement
4-3-1 (12) Confirmation of indoor unit address and position by using the remote
controller
[Confirmation of indoor unit address and the position]
1. When you want to know the indoor address though position of the indoor unit itself can be
recognized;
<Procedure> (Operation while the air conditioner operates)
1
If it stops, push
2
Push
button.
UNIT
The unit NO
(Disappears after several seconds) The
displayed unit No indicates the line address
and indoor address. (If there is other indoor
unit connected to the same remote controller
(Group control unit), other unit No is dis-
played every pushing
2. When you want to know position of the indoor unit using the address
• To confirm the unit numbers in a group control;
<Procedure> (Operation while the air conditioner stops)
The indoor unit numbers in a group control are successively displayed, and the corresponding indoor fan is
turned on. (Operation while the air conditioner stops)
1
Push
+
for 4 seconds or more.
• Unit No
is displayed.
• The fans of all the indoor units in a group
control are turned on.
2
Every pushing
unit numbers in the group control are
successively displayed.
• The firstly displayed unit No indicates the
address of the header unit.
• Only fan of the selected indoor unit is
turned on.
3
Push
button to finish the procedure.
All the indoor units in group control stop.
button.
is displayed on the LCD.
button.)
UNIT
buttons simultaneously
button, the indoor
UNIT
1
Operate
2
3
End
1
2
78
CODE No.
UNIT No.
UNIT
SET
CL
Operation procedure
1
2
→
CODE No.
SET DATA
UNIT No.
R.C. No.
UNIT
SET
CL
Operation procedure
1
2
3
→
→
End
Advertisement
Table of Contents
