Table of Contents
Advertisement
TCS-NET Relay Interface
■ ■ ■ ■ ■ Installation Method and Orientation
There are five installation methods for this relay interface as shown below: surface mount and wall
mounts. Use the attached screws.
REQUIREMENT
Do not install the unit in any of the following places.
• Humid or wet place
• Dusty place
• Place exposed to direct sunlight
• Place where there is a TV set or radio within one meter
• Place exposed to rain (outdoors, under eaves, etc.)
■ ■ ■ ■ ■ Installation Space and Maintenance Space
A side space for connecting through cable inlets and an upper space for
maintenance must be reserved before installation.
The other sides can be adjacent to surrounding objects.
Energy monitoring R I/F • Digital I/O R I/F
■ ■ ■ ■ ■ Installation Method and Orientation
There are five installation methods for this relay interface as shown below: surface mount and wall mounts.
Use the attached screws.
REQUIREMENT
Do not install the unit in any of the following places.
• Humid or wet place
• Dusty place
• Place exposed to direct sunlight
• Place where there is a TV set or radio within one meter
• Place exposed to rain (outdoors, under eaves, etc.)
■ ■ ■ ■ ■ Installation Space and Maintenance Space
A side space for connecting through cable inlets and an upper space
for maintenance must be reserved before installation.
The other sides can be adjacent to surrounding objects.
40
No good
100mm
100mm
No good
100mm
100mm
100mm
Advertisement
Table of Contents
