Cleaning The Door Air Inlets (Ip22 And Ip42) - ABB ACS880-207 Hardware Manual

76 Maintenance
1. Stop the drive and do the steps in section
you start the work.
2. Open the cabinet door.
3. Clean the interior of the cabinet. Use a vacuum cleaner and a soft brush.
4. Clean the air inlets of the fans and air outlets of the modules (top).
5. Clean the air inlet gratings (if any) on the door.
6. Close the door.

Cleaning the door air inlets (IP22 and IP42)

￭
Check the dustiness of the air inlet meshes. If the dust cannot be removed by vacuum
cleaning from outside through the grating holes with a small nozzle, proceed as follows:
1. Stop the drive and do the steps in section
you start the work.
2. Remove the fasteners at the top of the grating.
3. Lift the grating and pull it away from the door.
4. Vacuum clean or wash the grating on both sides.
5. Reinstall the grating in reverse order.
Electrical safety precautions (page 46)
Electrical safety precautions (page 46)
before
before