Categorization By Frame Size And Option Code; Use Of Component Designations; Terms And Abbreviations - ABB ACS880-207 Hardware Manual

10 Introduction to the manual

Categorization by frame size and option code

The instructions and technical data which concern only certain unit or frame sizes are marked
with the size identifier.
The unit size can be identified from the basic code visible on the type designation label, for
example, ACS880-207-0420A-3 where 0420A is the unit size. The option codes of the unit
are listed after the plus sign. Section
designation code in detail.
The frame size of the IGBT supply module is, for example, R8i. The ratings table lists the
frame sizes.

Use of component designations

Some device names in the manual include the item designation in brackets, for example
[Q20], to make it possible to identify the components in the circuit diagrams of the drive.

Terms and abbreviations

Term
ACU
BCON
BCU
Control board
Control unit
Cubicle
CVAR
DC link
DI
Drive
FCAN
FCNA-01
FDCO-01
FDNA-01
FDPI
FEA-03
FECA-01
FENA-11
FENA-21
FEPL-01
FIO-01
FIO-11
FPBA-01
Frame, frame size
FSCA-01
FSO-12, FSO-21
ICU
IGBT
IGBT supply module
Type designation keys (page 39)
Description
Auxiliary control unit. Contains control electronics, auxiliary voltage circuitry, etc.
Type of control board
Type of control unit
Circuit board in which the control program runs
Control board built in a housing (often rail-mountable)
One section of a cabinet-installed drive. A cubicle is typically behind a door of its own.
Varistor board
DC circuit between rectifier and inverter
Digital input
Frequency converter for controlling AC motors
Optional CANopen® adapter module
Optional ControlNet™ adapter module
DDCS communication module with two pairs of 10 Mbit/s DDCS channels
Optional DeviceNet™ adapter module
Diagnostics and panel interface board
Optional I/O extension adapter
Optional EtherCAT® adapter module
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP® and PROFINET
IO® protocols
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP® and PROFINET
IO® protocols, 2-port
Optional Ethernet POWERLINK adapter module
Optional digital I/O extension module
Optional analog I/O extension module
Optional PROFIBUS DP® adapter module
Physical size of the drive or power module
Optional RS-485 (Modbus/RTU) adapter
Optional functional safety modules
Incoming unit
Insulated gate bipolar transistor
IGBT bridge and related components enclosed inside a metal frame or enclosure.
Intended for cabinet installation.
explains the type