Type Designation Key Of The Filter Module - ABB ACS880-207 Hardware Manual

44 Operation principle and hardware description

Type designation key of the filter module

￭
Type designation describes the composition of the filter in short. The type designation is
visible on the label (sticker) which is attached to the filter module. The complete designation
code is divided in subcodes:
• The first 1...16 digits form the basic code. It describes the basic construction of the filter.
The fields in the basic code are separated with hyphens.
• The plus codes follow the basic code. Each plus code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The plus codes
are separated by plus signs.
The following table lists the basic code and plus codes of the filter.
CODE DESCRIPTION
Basic codes
ACS880 Product series
BLCL LCL filter for frame R8i supply module. The delivery includes on/off-controlled cooling fan as
standard
Size
13, 15, See the technical data.
24, 25
Voltage range
5 Voltage rating: 380...500 V. This is indicated in type designation label as typical input voltage levels
(3~ 400/480/500 V AC).
7 Voltage rating: 525...690 V. This is indicated in type designation label as typical input voltage levels
(3~ 525/600/690 V AC).
Plus codes
C183 Internal heating element (included in the delivery as standard)
C188 Direct-on-line cooling fan (included in the delivery as standard with 230 V supply for BLCL-1x-x /
400 V AC supply for BLCL-2x-x)
G304 BLCL-1x-x only: 115 V AC 1-phase fan supply
G427 BLCL-2x-x only: 208 V AC 3-phase fan supply
P922 Module to be installed in the ABB cabinet (included in the delivery as standard)
V991 Hardware version. LCL filter modules with or without this code are interchangeable.