PDU8000 Modular Precision Power Distribution Cabinet
User Manual (1100 mm Deep)
3.
4.
5.
6.
Step 6 Use a torque wrench to tighten the bolts to a torque of 45 N· m in diagonal order.
----End
Issue 01 (2019-02-25)
Secure the connecting plates in the connection positions on the front door using screws,
as shown by (3) in
Figure
Use the same method to secure the connecting plates in the connection positions on the
rear door.
A connecting plate is initially secured by one screw. Remove the screw from the column of the
adjacent cabinet to secure the connecting plate.
Ensure that both the vertical deviation and the distances between cabinets are within 3 mm after the
cabinets are combined.
Repeat the preceding steps to combine other PDCs.
Figure 5-10 Combining PDCs
Reinstall the front and rear doors of the PDC.
Copyright © Huawei Technologies Co., Ltd.
5-10.
5 Installation Guide
44