Huawei PDU8000 User Manual page 143

PDU8000 Modular Precision Power Distribution Cabinet
User Manual (1100 mm Deep)
Figure 8-5 Opening the indicator protection panel
Step 3 Loosen the screw at the back of the indicator using a Phillips screwdriver, and remove the
cables, as shown in
Figure 8-6 Replacing an Indicator
Step 4 Remove the retaining ring from the indicator and remove the indicator from the mounting
hole.
Step 5 Put a new indicator into the mounting hole, secure the retaining ring, and connect the cables.
Step 6 Reinstall the fuse to reconnect the circuit.
Step 7 Verify that the indicator lights up properly.
Step 8 Reinstall the protective panel.
Issue 01 (2019-02-25)
Figure
When removing cables, label the cables with corresponding terminal ports for later connection.
Copyright © Huawei Technologies Co., Ltd.
8-6.
8 Maintenance Guide
136