Huawei PDU8000 User Manual page 100

PDU8000 Modular Precision Power Distribution Cabinet
User Manual (1100 mm Deep)
Figure 7-47 Communication (2)


Set an IP address for the Ethernet. The value ranges from 0.0.0.0 to 255.255.255.255. The
default value is 192.168.0.10.
Ensure that the IP address is unique on the network segment. Otherwise, the LCD cannot
work properly.

Set a subnet mask for the Ethernet. The value ranges from 0.0.0.0 to 255.255.255.255. The
default value is 255.255.255.0.

Issue 01 (2019-02-25)
IP address assign
− If the MDU is directly connected to a computer, the IP address can only be allocated
manually. The IP addresses of the MDU and computer must be in the same network
segment, and must be different.
− If the MDU is connected to a computer through a LAN switch or router with the
DHCP function, the IP address can be allocated manually or automatically.
 Manual: The IP addresses of the MDU and computer must be in the same
network segment, and must be different.
 Automatic: The MDU automatically queries available IP addresses in the
connected network. Ensure that the MDU and PC are on the same network
segment.
You can set IP address allocation to Manual or Automatic. If the UPS restarts, IP address allocation
automatically changes to Automatic. The IP address is bound as the IP address set last time, allowing
you to log in for the second time.
IP address
Subnet mask
Gateway
Copyright © Huawei Technologies Co., Ltd.
7 MDU Commissioning Guide
93