Huawei PDU8000 User Manual page 47

PDU8000 Modular Precision Power Distribution Cabinet
User Manual (1100 mm Deep)
Figure 5-5 Installing expansion sleeves
(1) M12 bolt
(4) Expansion sleeve
Step 7 Align the PDC mounting holes with the expansion bolt holes.
Step 8 Adjust the anchor bolts of the PDC using an adjustable wrench until the leveling feet touch
the floor.
Step 9 Level the PDC using a level and an adjustable wrench.
Issue 01 (2019-02-25)

Wrench a leveling foot clockwise to elevate the cabinet, or wrench a leveling foot anticlockwise to
lower the cabinet. The leveling feet can be adjusted within a range of 0–8 mm.

To prevent cabinet tilting, adjust all the feet at the four corners instead of one foot.
 Do not remove anchor bolts, because this work brings you only a great deal of reworking.
Copyright © Huawei Technologies Co., Ltd.
(2) Spring washer
(5) Concrete floor
5 Installation Guide
(3) Flat washer
40