Huawei FusionModule1000A40 Initial Configuration Parameter Manual page 79

Address
Remarks:
0
1
2
Remarks: The AC actuator connects to the ECC800 controller in wireless mode.
After a camera is commissioned, label the camera with its name and IP address.
Remarks:
Camera commissioning: Obtain the IP address automatically allocated by the ECC800 to the camera through Huawei IPC TOOL. Then access the camera on the WebUI over the IP address
Remarks:
to configure the internal IP address.
Optional Functions of the NetEco
No.
1 Fire alarm linkage air conditioner
2 Client authorization
3 Work order management
4 Energy efficiency management
Northbound SNMP interface for alarms
5
6 Northbound SNMP interface for performance data
7 Capacity management
8 Mobile APP O&M
DIP Switch Settings for the AI/DI Module
SW1
ON
OFF
ON
Function
SW2
ON
ON
OFF
SW3
ON
ON
ON
Yes/No
No
No
No
No
No
No
No
No