Huawei FusionModule1000A40 Initial Configuration Parameter Manual page 23

Table 3 Initial Configuration Parameters for the Management System
Monitoring Data Device
Device Model
Device Type Name
S5720-28X-PWR-
LAN Switch FE LAN Switch
LAN Switch FE Server
Collector_ECC Collector_E
FE ECC800-A2
800 CC800
Collector_ECC Smart ETH
FE
800 Gateway-1
Device IP Device
Address Address
N/A N/A
SI-AC
https://192.168.
2288H V5 N/A
9.11
https://192.168.
N/A
9.12
UT-H606 N/A N/A
WebUI User LCD User
Alarm
Name and Name and
Threshold
Password Password
N/A N/A N/A
https://192.168.9.
11：31943
User name：
N/A admin N/A
Initial
password：
Huawei123
User name:
admin
N/A N/A
Password:
Changeme
N/A N/A N/A
Port to Upper-
DDF Upper-
Upper- Level
Transfer Level
Level Device
Port Device
Device Port
Port24 DDF-1 DDF DDF-1
LAN
1 or 2 N/A Port1
Switch
LAN
WAN_1 N/A Port2
Switch
Collector_
FE_2 N/A LAN_1
ECC800
Remarks
N/A
1. Server Remote
Management Port BMC
The default configuration is
as follows:
BMC IP address:
192.168.2.100
User name: root
Password: Huawei12#$
Configuration after system
pre-installation:
BMC IP address:
192.168.8.10
User name: root
Password: Changeme_123
2. PowerEcho maintenance
tool:
IP address of the
https://Neteco server: 32804/
User name: admin
Password: Changeme_123
WAN_1: 192.168.8.10
(Default IP Address)
WAN_2: 192.168.0.10
LAN_1, LAN_2:
192.168.248.10
WiFi default IP address:
192.168.245.10
User name: app
Password: Changeme
N/A