Yamaha 02R96 Owner's Manual page 263

250
Appendix A: Parameter Lists
COMPAND 5.1
Six input, six output compander for 5.1 surround, with individual solo for each band, and
gain reduction metering of left and right (L+R), left surround and right surround (LS+RS),
center (C), or LFE channels.
Parameter
LOW GAIN
MID GAIN
HI. GAIN
PRESENCE
THRE
RATIO
ATTACK
WIDTH
TYPE
LOOKUP
CEILING
L–M XOVR
M–H XOVR
SLOPE
KEY LINK
1. 5.1: key-in of all inputs are linked. 5.0: key-in of the L, C, R, LS, and RS are linked (LFE is indepen-
dent). 3+2: key-in of L, C, and R are linked, and LS and RS are linked. 2+2: key-in of L and R are
linked, and LS and RS are linked.
02R96—Owner's Manual
Range Description
–96.0 to +12.0 dB Low band level
–96.0 to +12.0 dB Mid band level
–96.0 to +12.0 dB High band level
For positive values, the threshold of the high band is low-
ered and the threshold of the low band is increased. For
–10 to +10
negative values, the opposite will occur. When set to 0, all
three bands are affected the same.
–24.0 dB to 0.0 dB Compressor threshold
1:1 to 20:1 Compressor ratio
0–120 ms Compressor attack
1–90 dB Width before the expander operates
Soft, Hard Compander type
0.0–100.0 ms Lookup delay
–6.0 dB to 0.0 dB, OFF Specifies the maximum output level
21.2 Hz–8.00 kHz Low/mid crossover frequency
21.2 Hz–8.00 kHz Mid/high crossover frequency
–6 dB to –12 dB Filter slope
1
Key-in linking