248
Appendix A: Parameter Lists
M. BAND DYNA.
Two input, two output 3-band dynamics processor, with individual solo and gain reduction
metering for each band.
Parameter
LOW GAIN
MID GAIN
HI. GAIN
PRESENCE
EXP. THRE
EXP. RAT
EXP. REL
EXP. BYP
CMP. THRE
CMP. RAT
CMP. REL
CMP. ATK
CMP. KNEE
CMP. BYP
LIM. THRE
LIM. REL
LIM. ATK
LIM. KNEE
LIM. BYP
LOOKUP
L–M XOVR
M–H XOVR
SLOPE
CEILING
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
02R96—Owner's Manual
Range
Description
–96.0 to +12.0 dB
Low band level
–96.0 to +12.0 dB
Mid band level
–96.0 to +12.0 dB
High band level
For positive values, the threshold of the high band is low-
ered and the threshold of the low band is increased. For
–10 to +10
negative values, the opposite will occur. When set to 0, all
three bands are affected the same.
–54.0 dB to –24.0 dB
Expander threshold
1:1 to :1
Expander ratio
1
Expander release time
ON/OFF
Expander bypass
–24.0 dB to 0.0 dB
Compressor threshold
1:1 to 20:1
Compressor ratio
Compressor release time
1
0–120 ms
Compressor attack
0–5
Compressor knee
ON/OFF
Compressor bypass
–12.0 dB to 0.0 dB
Limiter threshold
Limiter release time
1
0–120 ms
Limiter attack
0–5
Limiter knee
ON/OFF
Limiter bypass
0.0–100.0 ms
Lookup delay
21.2 Hz–8.00 kHz
Low/mid crossover frequency
21.2 Hz–8.00 kHz
Mid/high crossover frequency
–6 dB to –12 dB
Filter slope
–6.0 dB to 0.0 dB, OFF
Specifies the maximum output level