Yamaha 02R96 Owner's Manual page 247

234
Appendix A: Parameter Lists
DYNA. FLANGE
Two input, two output dynamically controlled flanger.
Parameter
SOURCE
SENSE
DIR.
DECAY
OFFSET
FB GAIN
LSH F
LSH G
EQ F
EQ G
EQ Q
HSH F
HSH G
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
DYNA. PHASER
Two input, two output dynamically controlled phaser.
Parameter
SOURCE
SENSE
DIR.
DECAY
OFFSET
FB GAIN
STAGE
LSH F
LSH G
HSH F
HSH G
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
02R96—Owner's Manual
Range Description
INPUT, MIDI Control source: input signal or MIDI Note On velocity
0–100 Sensitivity
UP, DOWN Upward or downward frequency change
1
Decay speed
0–100 Delay time offset
Feedback gain (plus values for normal-phase feedback,
–99 to +99%
minus values for reverse-phase feedback)
21.2 Hz–8.00 kHz Low shelving filter frequency
–12 to +12 dB Low shelving filter gain
100 Hz–8.00 kHz EQ (peaking type) frequency
–12 to +12 dB EQ (peaking type) gain
10.0–0.10 EQ (peaking type) bandwidth
50.0 Hz–16.0 kHz High shelving filter frequency
–12 to +12 dB High shelving filter gain
Range Description
INPUT, MIDI Control source: input signal or MIDI Note On velocity
0–100 Sensitivity
UP, DOWN Upward or downward frequency change
1
Decay speed
0–100 Lowest phase-shifted frequency offset
Feedback gain (plus values for normal-phase feedback,
–99 to +99%
minus values for reverse-phase feedback)
2, 4, 8, 10, 12, 14, 16 Number of phase shift stages
21.2 Hz–8.00 kHz Low shelving filter frequency
–12 to +12 dB Low shelving filter gain
50.0 Hz–16.0 kHz High shelving filter frequency
–12 to +12 dB High shelving filter gain