Yamaha 02R96 Owner's Manual page 251

238
Appendix A: Parameter Lists
REV->PAN
One input, two output reverb and autopan effects in parallel.
Parameter
INI. DLY
REV TIME
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV BAL.
FREQ.
DEPTH
DIR.
WAVE
SYNC
NOTE
1. L<–>R, L–>R, L<–R, Turn L, Turn R
2.
02R96—Owner's Manual
Range Description
0.0–500.0 ms Initial delay before reverb begins
0.3–99.0 s Reverb time
0.1–1.0 High-frequency reverb time ratio
0.1–1.0 Spread
0–100% Reverb density
THRU, 21.2 Hz–8.00
High-pass filter cutoff frequency
kHz
50.0 Hz–16.0 kHz,
Low-pass filter cutoff frequency
THRU
Reverb and panned reverb balance (0% = all panned reverb,
0–100%
100% = all reverb)
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
1
Panning direction
Sine, Tri, Square Modulation waveform
OFF/ON Tempo parameter sync on/off
2
Used in conjunction with TEMPO to determine FREQ.