Initializing The 02R96 - Yamaha 02R96 Owner's Manual

Initializing the 02R96

The 02R96 can be initialized as follows.
Warning: This procedure will clear all user memories and reset all settings to their initial val-
ues. You may want to back up any important data beforehand via MIDI Bulk Dump (see
page 168). If you want to reset just the mix settings, recall scene memory #0 instead (see
page 139).
1 Turn off the 02R96.
While holding down the SCENE MEMORY [STORE] button, turn on the
2
02R96.
When the confirmation message appears, release the SCENE MEMORY
3
[STORE] button, select YES, and press [ENTER].
The following message is displayed while initialization is in progress: "Loading Factory Pre-
sets & Calibrating the Faders... Do Not Touch the Faders!"
It's important that you do not touch the faders while this message is displayed, as the faders
may not be calibrated correctly.
The display returns to normal when initialization is complete.
Initializing the 02R96
02R96—Owner's Manual
201