Yamaha 02R96 Owner's Manual page 190

Control Surface Operation with the Pro Tools Remote Layer
MACHINE CONTROL Section
[DISPLAY] (MEM-LOC) button
This button is used to open and close the Memory Locations window.
LOCATE MEMORY [1–8] buttons
These buttons perform the same transport-related functions as the 1–8 number keys on a
Macintosh keyboard. If you set the Numeric keypad Mode in Pro Tools to "Classic" (Setups
menu, Preferences), these buttons can be used to directly locate markers 1–8.
[REW] button
This button rewinds from the current cursor position (it's non-latching).
[FF] button
This button fast forwards from the current cursor position (it's non-latching).
[STOP] button
This button stops playback and recording.
[PLAY] button
This button starts playback from the current cursor position.
[REC] button
This button arms Pro Tools for recording ([REC] button indicator flashing), recording is
started by pressing the [PLAY] button ([REC] button indicator lit continuously).
Normally the MACHINE CONTROL section can be used to control Pro Tools only while
the Pro Tools Remote Layer is selected. By turning on the DAW CONTROL option on either
the Locate Memory page (see page 194) or the Machine Configuration page (see page 192),
the MACHINE CONTROL section can be used to control Pro Tools regardless of which
Layer is currently selected.
MACHINE CONTROL
LOCATE MEMORY
DISPLAY
(MEM-LOC)
1 2
SET 5 6
REW FF
STOP PLAY
3 4
7 8
REC
02R96—Owner's Manual
177