Hitachi CR22N Instruction Manual page 60

2-4 Selecting the Rotor
Step
Touch panel operation
When the desired rotor is not
3
displayed, press the
Rotor Catalog button.
In the ROTOR CATALOG
screen, press the field of the
desired rotor type.
In the screen for selecting the
4
rotor, press the row of the
desired rotor. Check that the
pressed row turns blue and
press the Enter button.
The desired rotor is displayed
5
in the ROTOR indicator of the
Run screen.
NOTE (1) Selecting the rotor is required to display and set an RCF value (see Section 2-3-3 "Displaying
and Setting RCF").
(2) You can select your rotor in the Rotor Management screen, if you registered your rotor in
advance (see Section 2-6-4 (4) "Rotor Management").
Screen displays and notes
2-45
The ROTOR
●
CATALOG
screen appears.
The screen for
●
selecting the rotor
appears.
The pressed
row turns from
white to blue.
The Run screen
●
reappears.
ROTOR
indicator