Hitachi CR22N Instruction Manual page 20

2-2-1 Setting Run Conditions
[Display and operations when entering the run parameters]
The on-screen keypad appears by pressing the SPEED area, TIME area, TEMP, or ACCEL/DECEL area.
(1) Press the area of the
desired item to turn the
upper part blue.
(2) Enter the desired numeric value with
the on-screen keypad.
(e.g.) SPEED:22,000rpm
Press the
(3) If you do not want to change
any other setting, press the
button on the
Enter
on-screen keypad.
If you want to change other
settings, press the area of
the desired item, and the
pressed area will become
the input wait state.
The new setting is displayed
In the lower part of the
pressed area.
.
2 2 0 0
Fig. 2-2-1 Displaying the New Setting
Color of the upper part：Blue
2-5
[On-screen keypad]