Step
Touch panel operation
2
Press t he box (for displaying a
program No.).
3
Press
the
program No. for which you
want to create (or change) a
program, and make sure
that the pressed row turns
blue.
Then
press
button.
If you want to change a item
of the program, press the
item (-) which you want
to change.
If a SPEED, REMARK, etc. are displayed in the row of a
○
program No., run parameters have already been stored for
that program.
If you want to create a new program, press a row that does
○
not display a SPEED, REMARK, etc.
row
of
the
the
Select
SPEED/TIME/TEMP fields display the specified setting.
ACCEL/ DECEL, and DECEL SLOPE fields display
the specified setting.
ROTOR field displays the specified rotor.
RCF / SAMPLE HEIGHT fields display the specified setting.
g . sec fields display the specified setting.
REMARK fields display the entered remark.
Screen displays and notes
2-20
2-3-1 Programmed Operation
The PROGRAM
screen appears.
(If you want to store
the run parameters
as program No.4,
press the row of the
program No.4.)
Select button
The screen for
displaying the run
parameters appears.