Hitachi CR22N Instruction Manual page 14

1-2-1 Touchscreen
〔Functions of the Run screen〕
No. Name and symbol
(4) button
(5) button
(6) button
button
(7)
(8)
〔Functions of the on-screen keypad〕
No. Name and symbol
(9) On-screen keypad
〔External connection〕
No. Name and symbol
USB (host side)
(10)
(10)
USB (device side)
(11)
(11)
LAN
(12)
(12)
〔Functions of the on-screen keypad〕
Press this button to specify program settings and so on (see section
2-3-1).
Displays the RCF (relative centrifugal force) values.
Press this button to an RCF value (see section 2-3-3).
Displays the g . sec values.
Press this button to a g . sec value (see section 2-3-4).
Press this button to set a start time or finish time (see section 2-3-5).
Displays the user name (see section 2-6-4).
area
Use the on-screen keypad to enter numeric values for run parameters.
：/ -
Hold
CE Press this to cancel input (for example, if you enter the wrong number or
Enter Press this to save the entered setting.
x
Use the USB connection to output the operation history of the centrifuge to USB
memory. (CR22N only)
Use for connecting optional items.
Use for connecting the LAN cable (to establish communication between "himac
LogManager" (option) on your computer and the centrifuge).
Functions and actions
Functions and actions
When entering a time: Switches from minutes to seconds.
(Option: Switches from hours to minutes.)
When entering a temperature: If a temperature is below zero,
press this to enter "minus sign (-)".
When entering the operation time: Sets continuous running.
the wrong value for a run parameter).
Press this to close the on-screen keypad.
Functions and actions
1-4