Hitachi CR22N Instruction Manual page 26

2-2-2 Operational Procedure
Fig. 2-2-2 summarizes the operational procedure.
START
Turn on the POWER switch.
Open the door and install
the rotor.。
Close the door and set
the run conditions.。
The temperature control turns on.
Press the START
button.
The door is locked.
The rotor is rotating at the set speed.
For information on how
to set the run conditions,
see section 2-2-1.
Fig. 2-2-2 Operational Procedure
Reaches the set time or
press the STOP
Open the door,
remove the rotor, then turn
the centrifuge power
2-11
button.。
Rotor stops.
The door lock is released.
The temperature control turns off.
off.。
End