Basic Operation; Setting Run Conditions - Hitachi CR22N Instruction Manual

WARNING: Do not incline or move the instrument while the rotor is spinning.
Do not place any object on the instrument or lean on the instrument.
CAUTION: 1. Do not press the touchscreen with a sharp-pointed object such as a ballpoint pen.
2. If abnormal sound is heard during the operation, stop the operation immediately
and contact a Hitachi Koki authorized sales/service representative.

2-2-1 Setting Run Conditions

This section will first describe the screen for basic operation (the Run screen). For the display at the normal
operation and the display when setting the run conditions, refer to Section 1-2-1.
[Run screen]
The screen for displaying the specified setting and current status is called the Run screen.
The SPEED, TIME, and TEMP areas display the current status in the upper part and the specified setting in
the lower part.
The acceleration (ACCEL) and the deceleration (DECEL) area displays the specified setting.

2-2 Basic Operation

Fig. 2-2-1 (1) Run Screen
2-4
2-2 Basic Operation
2-2-1 Setting Run Conditions
Current status
Specified setting