Hitachi CR22N Instruction Manual page 48

2-3-3 Displaying and Setting RCF
Step Touch panel operation
3 Press the box (for displaying
a RCF(g)).
4
Press the area of desired
item.
If the color of the upper part is
blue, proceed to step 5.
If you want to set a SAMPLE
HEIGHT, proceed to step 6.
Screen displays and notes
Rotor which you selected
Specified setting of
a RCF value
The specified setting of a RCF(g) value, the specified
○
setting of a SPEED, and the specified setting of a Sample
Height are displayed in the screen for setting a RCF value.
The specified setting of a SPEED displayed in this screen is
the same as the specified setting of a SPEED displayed in
the Run screen.
Color:
blue
If you want to change other settings, press the area of the
○
desired item, and the pressed area will become the input
wait state.
2-33
Screen for
●
setting a RCF
value appears.
Specified setting
of a SAMPLE
HEIGHT
Specified setting
of a SPEED
The upper part
●
turns blue.