Appendix C - Electromagnetic Compatibility - GE Panda iRes Warmer Operation And Maintenance Manual

__________________________________________
Electromagnetic compatibility (EMC) guidance
Safety Standards: IEC 60601-1, IEC 60601-2-19 and IEC 60601-2-21,
EMC Standards: IEC 60601-1-2 2nd ed.
WARNING:
Medical Electrical Equipment needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information provided below.
WARNING:
Portable and mobile RF communication equipment can affect Medical Electrical Equipment.
Caution should be use when operating such device around Medical Electrical Equipment
WARNING:
This equipment/system is intended for use by healthcare professionals only.
This equipment/system may cause radio interference or may disrupt the operation of
nearby equipment. It may be necessary to take mitigation measures, such as re-orienting
or relocating the equipment/system or shielding the location.
Manufacturer's guidance and declaration regarding electronic emissions
The Giraffe warmer is intended for use in the electronic environment specified below. The user of the
Giraffe warmer should ensure that it is used in such an environment.
Electromagnetic Emissions
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic
emissions
IEC 61000-3-2
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Panda iRes Warmer M1110737 006
Electromagnetic Compatibility
Compliance Electromagnetic environment guidance
Group 1 The Giraffe Warmer uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
Class A The Giraffe Warmer is suitable for use in all
establishments, other than domestic and those directly
connected to the public low voltage power supply
network that supplies buildings used for domestic
purposes.
Class A
Complies
© 2007 General Electric Company, all rights reserved
Appendix C
C-1