GE Panda iRes Warmer Operation And Maintenance Manual page 44

Illustration
3-4 Panda iRes Warmer
Step
4 Always preheat the bed before placing
the baby in the bed.
automatically starts in Warmup Mode.
During Warmup Mode check baby alarms
are deactivated. If you do not press the
"Admit Baby" key or the "Apgar On/Off"
key during the first minutes after start up,
the display will show "Warming..." and the
radiant heater will automatically run at
100% power.
indicates "Warmup Complete..." and the
default heater power setting drops to 50%.
The display continues to flash "Admit Baby"
until you press the "Admit Baby" key and
start normal operation
5 Pressing the "Admit Baby" key or the
"Apgar On/Off" key brings the Panda
Warmer to Manual Mode at 100% power.
An audible tone alerts the user to select a
heater power setting.
Press the "Admit Baby" key prior to placing
the baby on the bed. You may press the
"Admit Baby" key to start normal operation
of the warmer at any time
6 Select heater power setting using the up or
down temperature keys.
M1110737 006
Description
The Panda Warmer
After 7 minutes, the display
© 2007 General Electric Company, all rights reserved