Illustration
3-12
Panda iRes Warmer
Step
4
If in Manual Mode, briefly go to the Baby
Mode on the left side of the control panel.
Press the Mode key to change the warmer
from Manual Mode to Baby Mode. Note: If in
Baby Mode, skip to Step #6.
5
Enter the set temp that will serve as the
"Man. Temp Alarm" set point.
6
Return to Manual Mode and adjust the
heater power up or down to achieve the
desired baby's skin temperature.
M1110737 006
Description
NOTE: If in Baby Mode, skip to
Step #6.
© 2007 General Electric Company, all rights reserved