Tilting The Bed - GE Panda iRes Warmer Operation And Maintenance Manual

WARNING:
The Panda iRes Warmer and Giraffe Warmer bedside panels are different heights. Use only
the Panda iRes Warmer bedside panels on the Panda iRes Warmer.

Tilting the bed

Illustration
3-14 Panda iRes Warmer
Screen
M1110737 006
Description
Step
3 Remove the rear bedside panel by pressing
the release button and lifting up on the
panel.
Description
Step
1 The bed tilts twelve degrees to allow feet
up or head up positioning of the baby. The
tilt release is located underneath the foot of
the bed. Grasp both the handle and metal
release in one hand and squeeze. Push down
or lift up on the foot of the bed to the desired
position. Letting go of the release at any
point on the tilt path locks the bed in that
position.
© 2007 General Electric Company, all rights reserved