Controller Checks - GE Panda iRes Warmer Operation And Maintenance Manual

Controller checks

WARNING:
Do not use the warmer in the presence of flammable anesthetics: an explosion hazard
exists under these conditions.
WARNING:
Always connect the warmer directly to a hospital grade wall outlet. Connecting to a power
strip or another piece of equipment may result in power failure errors.
Illustration
2-4 Panda iRes Warmer
Step
1 Make sure the power cord is connected to
the outlet on the unit and to the rated power
supply.
2 Switch on the power at the mains switch
on the back of the unit, and at the standby
switch on the front control panel. Verify the
following:
M1110737 006
Description
• All the displays and indicators light
• The software revision appears
• The prompt tone begins
© 2007 General Electric Company, all rights reserved