Raising Or Lowering The Bedside Panels - GE Panda iRes Warmer Operation And Maintenance Manual

Raising or lowering the bedside panels

Illustration Description
Step
1 To lower a bedside panel, pull it up and then
pull the top edge away from the bed.
To raise a bedside panel, swing it to the
upright position, then allow it to engage in
the latched position.
2 To remove a bedside panel, lower the panel
and hold it parallel with the floor. Press the
side panel release button (arrow) with one
hand and remove the panel.
To replace a bedside panel, insert the panel
into the fixed end pin first. Then press the
side panel release button in with one hand,
place the panel in position and release the
pin.
Panda iRes Warmer M1110737 006 © 2007 General Electric Company, all rights reserved 3-13