Figure 9-32 Automatic Registration Basic Setup; Figure 9-33 Automatic Registration Personal Id Index; Figure 9-34 Automatic Registration User Name And Password Assignment - NEC Sl2100 Networking Manual

SL2100
6. Program 15-05-27
Each IP phone requires a unique personal ID index. Valid settings are 1 ~ 512.
7. Program 84-22-01
Assign the user ID and password to be associated with the Personal ID Index assigned in Step 6.

Figure 9-34 Automatic Registration User Name and Password Assignment

8. The SIP MLT Station requires assignments to be made in the phone itself. Enter the Program
Mode in the station using the following steps.
The station does not require an Ethernet connection to enter the program mode. Only power is
required. Power can be provided by an AC adapter plugged into the phone or by POE provided by a
data switch. If the data switch is providing POE it MUST be using the 802.3AF standard.
For Basic bench testing, only the following assignments are required:
• At this point, you are prompted with a User Name and Password. These are the defaults:
User Name: ADMIN
Password: 6633222
The user name should already be entered in the terminal.
• Press Set soft key to step down to the password field.
• After you enter the password, press OK soft key.
9-42

Figure 9-32 Automatic Registration Basic Setup

Figure 9-33 Automatic Registration Personal ID Index

ISSUE 1.0
IP Multiline Station (SIP)