OfficeServ 7100
TECHNICAL MANUAL
3.5.7 8SLI
This card provides 8 ports for connecting analog stations. It can go into slots 1 and/or 2.
Add as many as needed. This card automatically detects DTMF or dial pulse signals
from SLT. This card does not have any DTMF receivers; it uses system resources.
FRONT VIEW OF 8SLI CARD
The front view of the 8SLI card is shown in the figure below:
Front panel components of the 8SLI:
Ports & LEDs
P1~P8
P1~P8 LED
• Port 1 (Pins 1 & 2) supports Power Failure Transfer function
•
See Section 7.1.2 for port
• Do not connect devices with a total REN greater than 5.0 to this card.
Figure 3.27 Front View of the 8SLI Card
Table 3.10 Ports and LEDs of the 8SLI Card
Function Description
Station ports for analog phones.
These LEDs indicate the operation status of the ports.
- Off: The station is not active on a call.
- On: The station is active on a call.
Pinout/Wiring.
3.27
Table of Contents
Home Page
INSTALLATION
PART 3 APRIL 2007
(Refer to Section 3.4).