Samsung OfficeServ 7100 Technical Manual page 75

Hide thumbs Also See for OfficeServ 7100:
Table of Contents

Advertisement

OfficeServ 7100
TECHNICAL MANUAL
6)
The RUN LED of the MP10 card lights green and the MC LED flashes when the
system normally starts the booting process.
7)
Once the booting is complete, the RUN LED of the MP10 card flashes green, and
the MC LED stops flashing and remains lit. (It takes approximately 2 ½ to 3
minutes to boot up).
8)
Enable MGI channels by entering the appropriate license key in system
programming (if MGI services are required).
If the MMC+ card is not detected
If the system cannot detect the MMC+ card, the MC LED might not light or
flash. In such cases, turn off the power, replace the MMC+ card and turn the
power on again. If the MMC+ card is still not detected, turn off the power and
replace the MP10.
9)
Check if the LED status of other interface cards are normal.
If the LED status of the MP10, or interface card is abnormal, turn off system power and turn the
power on again.
8.3 PRECONFIGURED NUMBERING OF EXTENSION
AND CO LINES AND STATIONS
The OfficeServ 7100 has been designed as plug-n-play to operate right out of the box
with minimum programming and little installation time required. The office server 7100
comes prepackaged with hardware to support 4 CO lines and 8 digital stations (Only 6
iDCS 28 button keyset are provided), and 4 ports of embedded voicemail. Other types
of iDCS, DS and ITP series phones can be connected if necessary.
When the system is powered up, it will read the hardware components and self
configure a default database to support the following:
• iDCS 28 button phones (pre-labeled) in a squared 4 lines X 8 stations configuration.
o CO lines 701 through 704
o Stations 201 through 208
o Direct station select key (DSS) keys 201 through 208
o Speed dial keys 01 through 05
o Feature keys (Directory, Call Log, Group Listen, Intercom, DND)
o 50 CID review blocks per station
o 50 Call Log blocks per station
o 50 Station speed dial buffers per station
• 500 System speed dial buffers.
• Operator group 500(normal) with members 201 through 208,
• Voicemail group (BI-VMS) 519 with member 301 through 304
Home Page
8.2
Table of Contents
INSTALLATION
PART 8 APRIL 2007

Advertisement

Table of Contents
loading

Table of Contents