Samsung OfficeServ 7100 Technical Manual page 23

OfficeServ 7100
TECHNICAL MANUAL
3.2.3 Installing MP10
Install processor card (MP10) in Slot 0. The locations of Slot 0 through slot 2 are
described in figure 3.1.
1) Check the exterior of the MP10 card for any damage. If damage is found, do not
proceed with installation. Contact Samsung Technical Support.
Power the system OFF when installing or removing cards.
POWER TO THE CABINET MUST BE TURNED OFF. Failure to
do so will damage the card, cabinet and/or corrupt the data moving
along the data bus.
2) Align the MP10 card to the guardrail of slot 0 and carefully slide it in.
3) Press and lock the lever to fully insert into the slot.
Figure 3.5 Mounting the MP10 into Slot 0
Figure 3.6 Secure the MP10 into Slot
3.6
Table of Contents
Home Page
INSTALLATION
PART 3 APRIL 2007