Figure 2.8 Installation On A Wall; Figure 2.9 Installation On A Wall; Figure 2.10 Installation On A Wall - Samsung OfficeServ 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
3) With a hammer, drive plastic anchors into the drilled holes.
4) Align the screw holes of the wall mount bracket to the position that the plastic
anchors are driven. Insert screws to each hole and tighten the screws with a Phillips
screw driver.
5) Two screws exist in the two screw holes among the four screw holes on the bottom
side of the OfficeServ 7100 cabinet. Unscrew the two screws to a height of about
2 mm.

Figure 2.8 Installation on a Wall (3)

Figure 2.9 Installation on a Wall (4)

2 m

Figure 2.10 Installation on a Wall (5)

2.6
Table of Contents
Home Page
INSTALLATION
PART 2 APRIL 2007