ABB ACH580 Series Installation, Operation And Maintenance Manual page 107

ACH580 Ultra-Low Harmonic Drives Installation, Operation and Maintenance Manual
6 Press the Up/Down arrows to change
the Parameter Value.
7 Press ENTER to store the modified
value or press ESC to leave the
Parameter Edit mode.
8 Press ESC to return to the listing of
Parameter Groups, and again to
return to the Main Menu.
9 Press ESC to return to the Default
Display from the Main Menu.
Note: In the Parameter Edit mode the current parameter value appears below the
parameter name.
Note: To view the default parameter value, press the Up/Down arrows
simultaneously. Press Enter to restore the default parameter value or press ESC to
leave the Parameter Edit mode.
1601 START/STOP
[
*1601 START/STOP
or
1602 PERMISSIVE
*16 SYSTEM CTRL
17 OVERRIDE
DRIVE SELECTED
BYPASS IN OFF
107
1:DI1 ]
ACH580-3BCR/BDR