Mitsubishi Electric 800 Series Instruction Manual page 73

Function Pr.
group
C42 A630
C43 A631
C44 A632
C45 A633
PR.CL
ALLC
ER.CL
— PR.CH
— PM
— AUTO
— PR.MD
*1 Gr.1 and Gr.2 are the parameter initial value groups. (Refer to
*2 Differs depending on the capacity.
6%: FR-E820-0050(0.75K) or lower, FR-E840-0026(0.75K) or lower
5%: FR-E860-0017(0.75K)
4%: FR-E820-0080(1.5K) to FR-E820-0175(3.7K), FR-E840-0040(1.5K) to FR-E840-0095(3.7K)
3%: FR-E820-0240(5.5K) or higher, FR-E840-0120(5.5K) or higher, FR-E860-0027(1.5K) to 0040(2.2K)
2%: FR-E860-0061(3.7K) or higher
*3 Differs depending on the capacity.
5 s: FR-E820-0175(3.7K) or lower, FR-E840-0095(3.7K) or lower, FR-E860-0061(3.7K) or lower
10 s: FR-E820-0240(5.5K) or higher, FR-E840-0120(5.5K) or higher, FR-E860-0090(5.5K) or higher
*4 Differs depending on the capacity.
6%: FR-E820-0015(0.2K) or lower
4%: FR-E820-0030(0.4K) to FR-E820-0330(7.5K), FR-E840-0016(0.4K) to FR-E840-0170(7.5K)
1%: FR-E860-0017(0.75K) to FR-E860-0120(7.5K)
*5 For the Ethernet model, the setting is available only when the FR-A8AY is installed.
*6 For details, refer to the Instruction Manual (Communication).
*7 Available when the PLC function is enabled. (Pr.313 to Pr.315 are always available for settings in the Ethernet model.)
*8 For the standard model, the setting is available only when a communication option is installed.
72
3. Parameters
3.1 Parameter list (by parameter number)
Pr.
Name
PID display bias coefficient
PID display bias analog value 0% to 300%
PID display gain coefficient
PID display gain analog value 0% to 300%
Parameter clear
All parameter clear
Fault history clear
Initial value change list
PM initialization
Automatic parameter setting
Group parameter setting
Minimum
Setting range setting
increments
0 to 500, 9999 0.01
0.1%
0 to 500, 9999 0.01
0.1%
(0), 1 1
(0), 1 1
(0), 1 1
— 1
0 1
— —
(0), 1, 2 1
page 82).
Initial
Refer Customer
*1
value
to page setting
Gr.1 Gr.2
9999 342
20% 342
9999 342
100% 342
0 398
0 398
0 400
0 82
0 92
— 141
0 73