Inverter Model - Mitsubishi Electric 800 Series Instruction Manual

1.1

Inverter model

Check the rating plate on the side of the product. Some characters in the model name indicate the specification as follows.
FR-E8 0-
A
Rating plate
Inverter model
Input rating
Output rating
SERIAL
Country of origin
• A: The voltage class is shown.
Symbol
2 200 V class
4 400 V class
6 575 V class
• B: The inverter rated capacity or the inverter rated current is shown.
Symbol
0.1K to 7.5K Inverter ND rated capacity (kW)
0008 to 0330 Inverter ND rated current (A)
• C: The communication type and the functional safety specification are shown.
Symbol Communication / functional safety
None Standard model (RS-485 + SIL2/PLd)
E Ethernet model (Ethernet + SIL2/PLd)
• D: The output specification for monitoring and the rated frequency are shown for the standard model, and the
communication protocol group is shown for the Ethernet model.
Symbol
-1 Pulse (terminal FM), 60 Hz
-4 Voltage (terminal AM), 50 Hz
-5 Voltage (terminal AM), 60 Hz
PA Protocol group A (CC-Link IE TSN, CC-Link IE Field Network Basic, MODBUS/TCP, EtherNet/IP, and BACnet/IP)
PB Protocol group B (CC-Link IE TSN, CC-Link IE Field Network Basic, MODBUS/TCP, PROFINET)
• E: Availability of circuit board coating / plated conductors is shown.
Symbol Circuit board coating
None Without coating
-60 With coating
*1 Conforming to IEC 60721-3-3 3C2/3S2
B C D E
MODEL :FR-E820-0008-1
INPUT :XXXXX
OUTPUT:XXXXX
SERIAL:XXXXXXXXXXX
MADE IN XXXXX
Voltage class
Voltage class
Monitor output / rated frequency / communication protocol
*1
Plated conductor
Without plated conductors
Without plated conductors
1
2
3
4
5
6
7
8
9
10
11
1. Introduction
1.1 Inverter model