Expansion Board/Connector Conversion Adapter/Memory Cassette/Display Module Configuration - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
6.1.1 Expansion board/connector conversion adapter/memory cassette/display module
configuration
The connection positions and number of expansion boards, connector conversion adapter and memory
cassette configuration vary depending on the number of points in main units. For details, refer to the
description below.
• In the case of the main units (40/60 point type)
Model name
Expansion board
(Except for the FX
FX -2EYT-BD, FX
3G
FX -4EX-BD, FX
3G
FX 3G -8AV-BD
Connector conversion adapter
(FX -CNV-ADP)
3G
*1
Memory cassette
*1
Display module
*1. When the memory cassette and display module are used together, the transfer function of the
memory cassette is not available. Use the display module to transfer data stored in the memory
cassette.
*2. Can be connected in any position however only one device can be connected at one time.
*3. The memory cassette cannot be connected when the display module is connected to the BD2 (1st
position).
*4. Only the BD2 (1st position) and the BD2 (2nd position) can be used for connection. Only one display
module can be connected to the main unit.
*5. The display module cannot be connected when the memory cassette is connected to the BD2 (1st
position).
68
Connector conversion adapter
BD1 1st position
BD1 2nd position
BD1 (1st position)
-4EX-BD,
3G
-8AV-BD)
3G
-2EYT-BD,
3G
BD2 1st position
BD2 2nd position
Available connection position
BD1 (2nd position)
-
- -
-
*2
- -
6 Examination of System Configuration
6.1 Configuration of a Whole System
BD2 (1st position) BD2 (2nd position)
-
*2*3
*4*5
-
-
-