Examination Of System Configuration; Configuration Of A Whole System; Expansion Board/Connector Conversion Adapter/Memory Cassette System Configuration - Mitsubishi Electric MELSEQ FX3S Series User Manual

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition
6.

Examination of System Configuration

6.1

Configuration of a Whole System

The configuration of a whole system is shown below as an example.
Display module
Special adapters
6.1.1 Expansion board/connector conversion adapter/memory cassette system
configuration
One expansion board or connector conversion adapter, and one memory cassette can be connected.
The figure below shows the combination of each product and the available connection positions.
• 1st position: An expansion board, connector conversion adapter, display module or memory cassette can
be connected.
• 2nd position: A display module or memory cassette can be connected.
Connect a connector
conversion adapter to the
1st position of the BD slot.
The FX
3S
FX -EEPROM-32L
3G
can be connected to the
2nd position.
BD 2nd position
FX -5DM, FX
3S
When the 1st position is used by
an expansion board or connector
conversion adapter,
the FX -EEPROM-32L can be
3G
connected to the 2nd position.
Configuration of a whole system
Memory cassette
Connector conversion adapter
-5DM or
-EEPROM-32L
3G
Expansion boards
BD 1st position
• FX -4EX-BD • FX -2EYT-BD
3G 3G
• FX -232-BD • FX -422-BD
3G 3G
• FX -485-BD • FX -485-BD-RJ
3G 3G
• FX -2AD-BD • FX -1DA-BD
3G 3G
• FX -8AV-BD • FX -5DM
3G 3S
• FX -EEPROM-32L
3G
6 Examination of System Configuration
6.1 Configuration of a Whole System
Main unit
1
2
3
4
5
6
7
8
9
10
49