Canon imagePRESS Server F200 Installation And Service Manual page 98

Symptom
Activity light status
progresses from solid green
to solid red.
Activity light status:
Solid green, then
solid red.
Could not mount the dos/
boot partition.
imagePRESS Server is
getting power, the control
panel is not black, but the
buttons on the control
panel do not function.
T
ROUBLESHOOTING
Possible cause
Possibly one of the following:
• Problem with system software
• Print job is corrupt or too large
• Faulty UIB cable
• CPU overheated
• Faulty motherboard
Control panel messages
When transferring options following
installation of a new motherboard
(page 56), you used the Feature Update
CD. The imagePRESS Server does not
support the Feature Update CD.
Control panel functions
Possibly one of the following:
• Problem with the Fiery application
• Faulty user interface board
Suggested action
Startup (continued)
1 If you suspect that the problem may be caused by a print
job, try printing a different job.
2 Recheck all cables and connections.
3 Reboot the imagePRESS Server and check whether the CPU
cooling assembly fan is operating. If the fan is properly
connected to the motherboard but does not operate, replace
the cooling assembly.
4 If the problem persists, restore the backup, or reinstall
system software (see
5 If the problem persists, try connecting another UIB cable
(see page
6 If the problem persists, replace the motherboard (see
page 51).
Obtain the motherboard replacement dongle and follow the
procedure on
1 Recheck all cables and connections.
2 Reboot the imagePRESS Server.
3 If the problem persists, restore the backup, or reinstall
system software (see
4 If the problem persists, replace the user interface board
(see page
page 84).
33).
page 56.
page 84).
41).
98