Starting, Shutting Down, Restarting, And Rebooting - Canon imagePRESS Server F200 Installation And Service Manual

U
SING THE IMAGE

Starting, shutting down, restarting, and rebooting

The customer will generally leave the imagePRESS Server on all of the time. Remember that
when the imagePRESS Server is powered off, network access to the copier is interrupted.
Power off the imagePRESS Server when you need to service it and before you remove or
attach any cables to it.
N : Use the reset button on the front of the imagePRESS Server only if the system is
OTE
unresponsive to keyboard or mouse actions.
T
O START THE IMAGE
1 Make sure that the power cable is attached and that the power switch is in the ON position.
2 Press the power button on the front panel.
3 Check the Activity light on the control panel.
The power supply automatically senses the correct voltage. Allow startup to proceed without
interruption. Do not press any buttons on the control panel while the system is starting.
PRESS S
ERVER
PRESS S
ERVER
25