Restoring And Verifying Functionality After Service - Canon imagePRESS Server F200 Installation And Service Manual

R
EPLACING PARTS

Restoring and verifying functionality after service

Before you leave the customer site, make sure that you complete the following steps. If you
cannot complete a step, determine the reason and correct the problem before continuing.
For more information, see
T
O REASSEMBLE THE IMAGE
1 Reseat all boards, cables, connectors, and other parts loosened or removed during service.
When routing cables inside the imagePRESS Server, make sure that:
• Covers are securely installed after routing cables
• Cable routing does not interfere with the operation of internal components nor interfere
with removing or replacing components
• Cables are not tangled nor looped around internal circuit boards or components
(such as capacitors and resistors)
• Cables do not lie on or against any internal heating element
• Cables do not interfere with opening or closing imagePRESS Server panels
• Cable slack is secured with a tie-wrap
2 Restore the imagePRESS Server to the upright position.
3 Replace any panels that you removed earlier, as described on
4 If you replaced the motherboard, make sure that the new motherboard solves the problem
that you are troubleshooting, and then transfer options to the new motherboard (see
page 55).
5 If the imagePRESS Server is to be mounted on the furniture with the monitor, see the
reassembly instructions that is provided with the furniture assembly.
6 Connect the power cable to the imagePRESS Server (see
7 Connect the imagePRESS Server to the copier (see
8 Print the Test Page and Configuration page.
• If the imagePRESS Server does not start up, refer to the startup problems listed on
page
• If pages do not print, verify that the interface cables are properly connected (see printing
problems on
• If image quality is poor, test the copier (see the service documentation that accompanies
the copier).
9 Connect to the network (see
10 Ask the site administrator to download a test job over the network.
If the job does not print, or has poor image quality, see printing problems and the
Troubleshooting sections of the user documentation.
Troubleshooting
PRESS S
ERVER AND VERIFY FUNCTIONALITY
95.
page 102).
page
on page 88.
page
page 19).
19).
page 35.
18).
78