Figure 26: Removing/Replacing The Dvd Drive - Canon imagePRESS Server F200 Installation And Service Manual

R
EPLACING PARTS
5 Remove the DVD drive from the switch bank assembly.
Screw
(1 of 4)
F 26:
IGURE
T DVD
O REPLACE THE
1 Install the DVD drive in the switch bank assembly.
2 Install the switch bank assembly in the component sled, and then install the component sled
in the chassis (see
3 Attach the power and data combination cable to the back of the DVD drive.
4 If you installed a new DVD drive, make sure to reset the time and date in Setup (see
Configure Help for more information).
5 Reassemble the imagePRESS Server and verify its functionality (see
Removing/replacing the DVD drive
DRIVE
page 75).
DVD drive
Some switch bank assemblies
N :
OTE
have a metal post in this location that
is used in place of the screw.
Switch bank assembly
page
77
78).