Table of Contents
Advertisement
S
S
YSTEM
OFTWARE
Before installing system software
S
S
I
YSTEM
OFTWARE
NSTALLATION
I
NSTALLATION
The imagePRESS Server ships with pre-installed system software on the hard disk drive. If
you must reinstall system software when servicing the imagePRESS Server, use the latest
System Software and User Software DVDs.
Consider the following settings and features before you install system software.
•
Battery, date, and time:
service, make sure to configure the time and date in Setup before installing system
software. Otherwise, the system may hang during the user software installation segment
(see
page
100).
•
Before you reinstall the system software, check with the site administrator
Backup/restore:
if there is any backup available to restore.
If there is a backup for the entire hard disk drive (HDD), make sure to restore this
N
:
OTE
backup first in the Fiery System Installer. Doing so ensures that all the customized settings
and jobs on the HDD(s) will be restored. If this backup is not available, restore the image
from recovery partition, which is provided with the imagePRESS Server by default. This will
restore the imagePRESS Server to the factory default setting. You must install the system
software using the System Software DVDs only when you replaced the hard disk drive, or
restoring the backup does not solve the problem you are troubleshooting.
It is recommended to create a backup of the entire hard disk drive after you install the system
software and run the initial Setup. To create the backup or restore the system, use the Fiery
System Installer.
The following issues apply to the scenario where you reinstall the system from the System
Software DVDs.
•
All jobs in all print queues, and all jobs archived locally on the imagePRESS Server
Jobs:
hard disk drive are deleted when you reinstall the system software. To save jobs, ask the site
administrator to archive them to a CD/DVD or a location on the network, so that the jobs
can be imported back into the imagePRESS Server queue after system software
installation. For more information, see Command WorkStation Help.
Notify the network administrator at the customer site that some archived jobs may no longer
print after you install an updated version of the system software.
•
The list of jobs in the Job Log and any jobs in the queues are deleted when you
Job Log:
install system software. The network administrator can use Command WorkStation to
save a current list of jobs (not the actual jobs) from the Job Log.
If you removed or replaced the motherboard battery during
79
Hide quick links:
Advertisement
Table of Contents
