Specifications; Operation; Preparing To Tow The Machine - Toro CM-658H-S Operator's Manual

Recoil-start Handle
To start the engine, pull the recoil-start handle (Figure 12)
quickly to turn the engine over. The engine controls described
above must all be set correctly for the engine to start.

Specifications

Note: Specifications and design are subject to change without notice.
Model 68004
Batch Capacity 0.17 cubic meters
(6.0 cubic feet)
Total Volume 0.255 cubic meters
(9.0 cubic feet)
Drum Material Steel
Length 198.1 cm
(78 inches)
Width 116.8 cm
(46 inches)
Height 147.3 cm
(58 inches)
Weight 313 kg
(690 lb)

Operation

Important: Before operating, check the fuel and oil
levels, and remove debris from the machine. Ensure that
the area is clear of people.

Preparing to Tow the Machine

Important: Ensure that your tow vehicle has towing
capacity for the weight of the machine.
Important: Use a Class 2 or larger receiver.
Note: Ensure that your tow vehicle has the appropriate hitch
to tow the machine; options include a 50 mm (2 inch) ball
hitch or a pintle hitch.
Note: If the machine is equipped with a trailer-light kit,
ensure that the electrical connector of the tow vehicle is
compatible with the electrical connector of the machine.
If your tow vehicle has a different type of plug, obtain an
adapter from an automotive parts store.
1. Ensure the engine is stopped, the fuel valve is off, and
the drum is empty.
2. Using the handwheel, position the drum so that it is
pointing down toward the ground (Figure 15).
Oil-level Switch
The oil-level switch is located inside the engine, and it will
not allow the engine to run in the event the oil level is below
the safe operating limit.
68006 68007
0.255 cubic meters 0.255 cubic meters
(9.0 cubic feet) (9.0 cubic feet)
0.43 cubic meters 0.43 cubic meters
(15.1 cubic feet) (15.1 cubic feet)
Steel Steel
213.4 cm 215.9 cm
(84 inches) (85 inches)
142.2 cm 215.9 cm
(56 inches) (85 inches)
165.1 cm 180.3 cm
(65 inches) (71 inches)
362.9 kg 396.9 kg
(800 lb) (875 lb)
1. Drum pointing down
2. Drum-tilt brake engaged
3. Lock the drum into position by pushing down on the
14
68008
0.255 cubic meters
(9.0 cubic feet)
0.43 cubic meters
(15.1 cubic feet)
Polyethylene
215.9 cm
(85 inches)
215.9 cm
(85 inches)
180.3 cm
(71 inches)
396.9 kg
(875 lb)
Figure 15
drum-tilt brake handle (Figure 16).
68009
0.255 cubic meters
(9.0 cubic feet)
0.43 cubic meters
(15.1 cubic feet)
Polyethylene
213.4 cm
(84 inches)
142.2 cm
(56 inches)
165.1 cm
(65 inches)
380.9 kg
(837 lb)
1
2
3
G019806
3. Tow pole bolted in place