Huawei SUN2000-2KTL-L1 User Manual page 47

SUN2000-(2KTL-5KTL)-L1
User Manual

The PE point at the AC output port is used only as a PE equipotential point, and cannot
substitute for the PE point on the enclosure.

Keep the AC output power cable and the PE cable close to each other.

Keep the AC output power cable and the DC input power cable close to each other.

Ensure that the cable jacket is inside the connector.

Ensure that the exposed core is totally inserted into the cable hole.

Ensure that AC output cable is secured. Failing to do so may cause SUN2000 malfunction
or damage to its AC connector.

Ensure that the cable is not twisted.
Figure 5-7 Assembling an AC connector (three-core wire)
Issue 01 (2020-04-17) Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
41