Battery Control - Huawei SUN2000-2KTL-L1 User Manual

SUN2000-(2KTL-5KTL)-L1
User Manual
Parameter Name
----End

7.2.1.2 Battery Control

Function
If the SUN2000 connects to a battery, you need to set battery parameters.
Forcible Charge and Discharge
Step 1 On the home screen, choose Power adjustment > Battery control > Forced
charge/discharge and perform operations as required. Tap Submit.
Figure 7-8 Forced charge/discharge
Table 7-2 Description of forced charge/discharge parameters
Parameter
Charge/Discharge
Issue 01 (2020-04-17)
Description
Communication In the SUN2000 anti-backfeeding scenario, if this parameter is set to
disconnection Enable, the SUN2000 will derate according to the active power
fail-safe derating percentage when the communication between the SUN2000
and the Smart Dongle is disconnected for a period longer than
Communication disconnection detection time.
Communication Specifies the time for determining the communication disconnection
disconnection between the SUN2000 and the Dongle.
detection time
This parameter is displayed when Communication disconnection
fail-safe is set to Enable.
Copyright © Huawei Technologies Co., Ltd.
Description
Specifies the forced
charge/discharge manually.
7 Man-Machine Interaction
Value Range
 Stop

Charge
 Discharge
68