Label Description - Huawei SUN2000-2KTL-L1 User Manual

SUN2000-(2KTL-5KTL)-L1
User Manual
(1) LED indicators
(3) Hanging kit
(5) Heat sink
(7) DC switch locking screw hole
(9) DC input terminals (PV1+/PV1–)
(11) Battery terminals (BAT+/BAT–)
(13) Antenna port (ANT)
(15) AC output port (AC)

2.3 Label Description

Enclosure Labels
Table 2-2 Enclosure label description
Icon
Issue 01 (2020-04-17)
 Note a: The DC switch locking screw is used to lock the DC switch to prevent accidental startup. It
is delivered with the SUN2000.
 Note b: DC input terminals PV1 and PV2 are controlled by the DC switch.
Copyright © Huawei Technologies Co., Ltd.
(2) Front panel
(4) Mounting bracket
(6) Ventilation valve
a
(8) DC switch
(10) DC input terminals (PV2+/PV2–)
(12) Smart Dongle port (4G/FE)
(14) Communications port (COM)
(16) Ground point
Name
Burn warning
Delayed discharge
2 Product Introduction
b
(DC SWITCH)
Meaning
Do not touch a running
SUN2000 because the
enclosure is hot when the
SUN2000 is running.
 High voltage exists
after the SUN2000 is
powered on. Only
qualified and trained
electrical technicians
are allowed to perform
operations on the
SUN2000.

Residual voltage
exists after the
SUN2000 is powered
off. It takes 5 minutes
for the SUN2000 to
discharge to the safe
voltage.
11